Jamesway - Direct Express System

Direct XPress is engineered to give you everything you want and need in reliable cattle feeding equipment. High capacity, fast maintenance and low horsepower requirements, plus a low profile design, and to match your exact feeding needs.

Direct drive performance at the heart of every Direct XPress System is a hardworking, industrial drive gearbox with enclosed oil bath and standard 1, 2 or 3 hp C-faced motor.

"X" sections are "X-tra" strong and that means they will span longer distances between supports - up to 20 feet! Made of heavy specially formed 16-gauge, weather-resistant galvanized steel.

Direct Xpress Conveyors are available in 14", 18" or 24" width with smooth or textured "cold weather" belt up to 180 feet long.

High Capacity Direct Xpress feeders are available in 14" or 18" with heavy duty chain drive system. Feeding systems can be installed to fit your specific need for single lot, divided lot or multi lot.

A full line of belt conveyor accessories are available to custom fit your operation.

____________________________________________________________

Van Dale - Maxim I Feeding System

The Van Dale advantage will be yours when you put MAXIM I belt feeders and conveyors in your feeding operation. And the advantages are many.Advantages like 40 plus years of experience in engineering and manufacturing the best feeders and conveyors available anywhere. Advantages like top quality materials and construction. And advantages like the best trained dealer organization in the business. When you need help planning a system, or service after it's in, you can count on your Van Dale Dealer.

And now the great Van Dale lineup is even better with the addition of the MAXIM I line of 16" belt feeders and conveyors. High capacity, fast delivery, easy maintenance, low power requirements and options to match your needs.

____________________________________________________________

Patz - Chain & Flight Conveyor

Coupler brackets provide reinforcement for extra strength. Available truss rod and center brace allow 40- to
50-foot (12-15 m) clear span for convenient installation. Optional elbows 7½°, 15°, or 22½° allow elevating and conveying horizontally with one machine.

Conveyors are custom built to fit each installation. The basic unit is a 10-foot (3-m) conveyor consisting of a 5-foot (1.5-m) front section and a 5-foot (1.5-m) rear idler section. Add 2½-,5- or 10-foot (.8-, 1.5- or 3-m) bolt-together sections as needed.

Low maintenance requirements provide reliable performance and long service life. Bearings are long-life, prelubricated for dependable duty. Replaceable trough pans add service life. Cover sections are available to bolt on trough to keep out rain and other contaminants.

____________________________________________________________

Patz - Model 262 Conveyor

Elevates up to 40° for installation versatility - Install easily with custom-built lengths. Modular sections bolt together. Can be field cut to exact length as necessary.

Spans up to 25' (7.6 m) between supports. Cover sections are available to bolt on trough to keep out rain and other contaminants.

Optional spouts, extensions, and diverters allow precise placement of discharged material.

____________________________________________________________

Val-Metal - 962 Conveyor

Val-Metal's 9 inch Single Chain Conveyor fits the bill and it conveys large volumes of feed efficiency.

This all galvanised-steel conveyor with rubber backed steel flights an 62 pintle chain is the right design for moving bulky material like silage, shelled corn and grain on shorts run up to 70 feet.

Eliminates unnecessary spillage. Hopper efficiently funnels feed into conveyor. Set screws adjust chain tension up to 3 in.

Material is conveyed by ruged 62 pintle type chain with steel backed rubber flights, driven by self-cleaning cast iron sprockets.